How to make a Fold Bow with your Bowdabra...

1. Cut a 24" piece of Bowdabra bow wire and fold it in half. Lay it into the Bowdabra. You'll have a loop at one end and two loose pieces at the opposite end.
   
   
   
   
    
2. Take the end of the ribbon and twist the side that has the longest end and place it right side facing downwards into the Bowdabra. This is the beginning of your first loop.
   
   
   
   
    
3. scrunch down the ribbon with the bowdabra wand.
   
   
   
   
   
   
    
4. While the bow is still in the Bowdabra, thread the two loose ends of the Bowdabra bow wire through the loop at the other end.
   
   
   
    
5. Pull the bow wire tightly while the bow is still in the Bowdabra.
   
   
   
   
    
6. Gently pull the bow out of the Bowdabra. Separate the two loose ends of the bow wire and bring them around to the back of the bow. To tie off the bow, pinch the bow wire securely against the bow. Twist the bow 4 to 6 times in a clockwise direction.
   
   
    
7. Fluff and shape the bow.
   
   (scroll down to order)